Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
Posts: 3
Joined: Wed Sep 27, 2006 9:51 am


Post by NathanUnger »

I hope I'm on the right forum here.
Will the TA432 resistance probe work on my Picoscope 4444?
Is there a video or instructions on its use?
Is there also a temperature probe available?

User avatar
Posts: 43
Joined: Tue Feb 07, 2017 10:58 pm

Re: ta43w

Post by Grant_Baker »

No. The TA432 resistance probe is designed to be used with BNC+ connections. BNC+ connections are only found on Picoscope hardware that can apply voltage to probes such as current probes without batteries and the resistance probe.

The Pico 4444 T & M scope uses D9 connections not BNC+.

Post Reply