If you are not a PicoScope user and want advice with a diagnostic problem then post here. Forum members may be able to help.
- Posts: 1
- Joined: Mon Oct 25, 2021 9:42 pm
Hi guys . I'm a long time picoscope user that could do with some help . Vehicle toyota prado kdj 120 d4d engine setting code p2006 . Cleaned intake manifold and egr checked vacuum hoses solenoids etc. Any help would be much appreciated . Cheers Stefan
- Posts: 13
- Joined: Sat Aug 15, 2020 7:30 pm
Hi, the P2006 defines the malfunction of the motorized intake throttle, I would connect the oscilloscope to measure the power supply, position, consumption and mass of the actuator.
After the analysis of the results you will have the answer on a problem of operation of the actuator or a Problem of beam or if it is necessary to direct you to something else.