First, my english is not so good, i hope you understand me
Controll on a F21 1.6 N13 eninge the timing chain with tool 2 353 281. Result, chain is not OK.
So i controll it with PICO, but do not found the same in the libary, found a N13 waveform but it is different to mine.
Does someone have a waveform from the same engine ?
Channel A Crank
Channel B Inlet Cam
Channel C Outlet Cam
Hi, I'm a little confused as to why you need a waveform now that you have eastablished that the chain is not okay. I'd now be renewing the chain kit and checking over anything that could be affected by the chain drive. Once you have the engine running correctly, you can then scope your own cam and crank and post those waveforms.