crank, non start, no fuel pressure

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Post Reply
Kudugar
OneWave
OneWave
Posts: 21
Joined: Tue Jan 16, 2018 10:07 pm

crank, non start, no fuel pressure

Post by Kudugar »

HI All, please review scope on crank & cam correlation for non start but crank condition. freelander 2 2.2auto 2010 model. driving normal parked and non start thereafter. diesel pump overhauled and injectors new bocsh. no fault codes relative compression 3 x 100% and 1x 99%. fuel is getting through diesel pump but very low pressure, voltage on SCV is battery voltage and getting PWM on second control line of SCV.
Attachments
Land Rover_Freelander 2_2010_Diesel_20210410-0001.psdata
(10.03 MiB) Downloaded 274 times

User avatar
vasek
TwoWaves
TwoWaves
Posts: 106
Joined: Tue Feb 17, 2015 7:27 pm

Re: crank, non start, no fuel pressure

Post by vasek »

Hi.
The chain is out.
Here You go :
Attachments
LR FREELANDER 2.2L DURATORQ TD4 _ sync 2ms.png

Kudugar
OneWave
OneWave
Posts: 21
Joined: Tue Jan 16, 2018 10:07 pm

Re: crank, non start, no fuel pressure

Post by Kudugar »

THANKS YOU VERY MUCH,VASEK :D
will it be possible to forward me the actual psd file so i can measure as well at what degree i am out if possible?

i will update case once problem is located, it has cambelt and separate chain between cams.

Kudugar
OneWave
OneWave
Posts: 21
Joined: Tue Jan 16, 2018 10:07 pm

Re: crank, non start, no fuel pressure

Post by Kudugar »

Update, on changing cambelt using factory locking tools the variance in correlation seems to me to have gone worse.
blue is voltage relative comp test, green crank hall effect and red camshaft hall effect, voltage seems high on cam sensor as well? i am getting fuel pressure but only after 20 seconds of cranking
Attachments
Land Rover_Freelander 2_2010_Diesel_crank non start 20210415-0003.psdata
(4.79 MiB) Downloaded 259 times

Kudugar
OneWave
OneWave
Posts: 21
Joined: Tue Jan 16, 2018 10:07 pm

Re: crank, non start, no fuel pressure

Post by Kudugar »

hi , attached is new more complete test including cam, crank, injector no 1 and in no 1 cylinder pressure test with wpx500, still no dtc's logged, fuel pressure only start increasing after 20 seconds of cranking , i suppose as result of incorrect cam crank correlation?
your thoughts is highly appreciated.
Attachments
Land Rover_Freelander 2_2010_Diesel_non start 20210429-0001.psdata
(5.32 MiB) Downloaded 266 times

Kudugar
OneWave
OneWave
Posts: 21
Joined: Tue Jan 16, 2018 10:07 pm

Re: crank, non start, no fuel pressure

Post by Kudugar »

rescoped after refit of cambelt with pins, seems to have vacuum now and early valve event? your thoughts pls
Attachments
cambelt redone Land Rover_Frredone cambelteelander 2_2010_Diesel_20210504-0001.psdata
(4.6 MiB) Downloaded 254 times

kona
TwoWaves
TwoWaves
Posts: 66
Joined: Thu Feb 22, 2018 8:14 pm

Re: crank, non start, no fuel pressure

Post by kona »

---
Last edited by kona on Fri May 07, 2021 10:50 am, edited 1 time in total.

Kudugar
OneWave
OneWave
Posts: 21
Joined: Tue Jan 16, 2018 10:07 pm

Re: crank, non start, no fuel pressure

Post by Kudugar »

UPDATE, i redone in cyl comp test on all 4 and cyl 3 has no compression, and cyl 1 & 2 has the vacuum event noted, only cyl 4 seems to have good spec and hardly any vacuum event.
Attachments
cyl 4 Land Rover_Freelander 2_2010_Diesel_20210507-0005.psdata
(2.27 MiB) Downloaded 242 times
cyl 3 no compLand Rover_Freelander 2_2010_Diesel_20210507-0007.psdata
(406.58 KiB) Downloaded 251 times
cyl 2 Land Rover_Freelander 2_2010_Diesel_20210507-0008.psdata
(477.92 KiB) Downloaded 250 times
cyl 1 Land Rover_Freelander 2_2010_Diesel_20210507-0009.psdata
(439.64 KiB) Downloaded 260 times
all 4 cyl test 20210507_102530.jpg

Post Reply