EV kit vs Master Kit

Ask for and share advice on using the PicoScope kit to fix Electric Vehicles
Post Reply
adamkas
Newbie
Posts: 1
Joined: Tue Nov 03, 2020 8:58 pm

EV kit vs Master Kit

Post by adamkas »

Hello, I work for an automotive tool distributor. We have a customer that already has the 4 Channel Master Kit but are also interested in the new 4 Channel EV kit. Do you have documentation somewhere of each piece included in each kit so we can compare and see what they may be missing out on in the EV kit?

The website has a detailed listing for the EV kit, but not the master kit.

Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 1581
Joined: Sun Aug 25, 2013 7:22 am

Re: EV kit vs Master Kit

Post by Steve Smith »

Hello and thank you for the post.

The following link will help here using the “Compare Kits” button
https://www.picoauto.com/products/autom ... t/overview
Image 1
Image 1
Clicking on the compare kits will open a picture of your chosen kit contents and a table describing the kit items
Image 2
Image 2
The Master kit is best viewed by first clicking on the 4 Channel Advanced kit (to view contents) followed by clicking on the Master kit to view additional content
Image 3
Image 3
The Master kit is an upgraded and extended version of the Advance kit

I hope this helps, take care……Steve

Littlejohn
OneWave
OneWave
Posts: 15
Joined: Thu Nov 01, 2018 4:11 pm

Re: EV kit vs Master Kit

Post by Littlejohn »

Hello
I have just received the TA041 probe and I would like to power it via USB but I can't see on the website and USB power leads? What does everyone use?

Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 1581
Joined: Sun Aug 25, 2013 7:22 am

Re: EV kit vs Master Kit

Post by Steve Smith »

Hello and thank you for the post

This is an interesting question for sure and I have just been on a "journey" looking for a solution.

Here we require 6 V / 60 mA DC mains adaptor https://www.picoauto.com/products//elec ... e-x10-x100

I have then taken a look on the T&M site and found this https://www.picotech.com/accessories/po ... ttery-pack. Having dug deeper, this is not applicable to the TA041

Unfortunately, a 6 V 60 mA power supply is not a Pico accessory at present so I will raise a new feature request ASAP to have one included on our website

In the meantime, Amazon looks like our only option https://www.amazon.co.uk/dp/B097YFKWZB/ ... rd_plhdr=t

Thank you for raising this one, take care......Steve

Post Reply