2004 Land Rover Discovery Crankshaft sensor code

If you are not a PicoScope user and want advice with a diagnostic problem then post here. Forum members may be able to help.
Post Reply
GTautoElectrix55
Newbie
Posts: 1
Joined: Sun May 09, 2021 8:27 pm

2004 Land Rover Discovery Crankshaft sensor code

Post by GTautoElectrix55 »

Hi we have got a this car in at the shop Keeps setting code p0335-92crankshaft sensor A circuit have resistance check sensor tests ok. Sensor has been changed and wiring looks ok. Have scoped Crank Cam and igniton coil 1.
Attachments
Land Rover_Discovery_2004_20210510-0002.psdata
(16.8 MiB) Downloaded 26 times
Land Rover_Discovery_2004_20210510-0003.psdata
(9.35 MiB) Downloaded 26 times

liviu2004
TwoWaves
TwoWaves
Posts: 329
Joined: Sat Mar 19, 2016 8:23 am
Location: Netherlands

Re: 2004 Land Rover Discovery Crankshaft sensor code

Post by liviu2004 »

Have a look into waveform library if you can find something similar. To me, crank signal does not look ok, you have either a ring teeth problem, or space too big between sensor and wheel, or an aftermarket sensor.

ronw38
TwoWaves
TwoWaves
Posts: 50
Joined: Sun Aug 27, 2017 8:00 am

Re: 2004 Land Rover Discovery Crankshaft sensor code

Post by ronw38 »

Just a thought, did you scope crank sensor at the sensor or the ECU the latter checks the complete circuit. Cheers Ron W

Post Reply