EV kit vs Master Kit

[adamkas]

Hello, I work for an automotive tool distributor. We have a customer that already has the 4 Channel Master Kit but are also interested in the new 4 Channel EV kit. Do you have documentation somewhere of each piece included in each kit so we can compare and see what they may be missing out on in the EV kit?

The website has a detailed listing for the EV kit, but not the master kit.

[Steve Smith]

Hello and thank you for the post.

The following link will help here using the “Compare Kits” button
https://www.picoauto.com/products/autom ... t/overview

Image 1

Clicking on the compare kits will open a picture of your chosen kit contents and a table describing the kit items

Image 2

The Master kit is best viewed by first clicking on the 4 Channel Advanced kit (to view contents) followed by clicking on the Master kit to view additional content

Image 3

The Master kit is an upgraded and extended version of the Advance kit

I hope this helps, take care……Steve

[Littlejohn]

Hello
I have just received the TA041 probe and I would like to power it via USB but I can't see on the website and USB power leads? What does everyone use?

[Steve Smith]

Hello and thank you for the post

This is an interesting question for sure and I have just been on a "journey" looking for a solution.

Here we require 6 V / 60 mA DC mains adaptor https://www.picoauto.com/products//elec ... e-x10-x100

I have then taken a look on the T&M site and found this https://www.picotech.com/accessories/po ... ttery-pack. Having dug deeper, this is not applicable to the TA041

Unfortunately, a 6 V 60 mA power supply is not a Pico accessory at present so I will raise a new feature request ASAP to have one included on our website

In the meantime, Amazon looks like our only option https://www.amazon.co.uk/dp/B097YFKWZB/ ... rd_plhdr=t

Thank you for raising this one, take care......Steve