1997 sabb abs bosch 5.3

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Post Reply
mesa80
Newbie
Posts: 1
Joined: Fri Apr 12, 2019 2:04 am

1997 sabb abs bosch 5.3

Post by mesa80 » Wed Feb 12, 2020 4:32 pm

hey my fellow pico users. Have a question regarding set up for my pico on this sabb as I can of coarse use the drop down and use suggested settings but still can not obtain a signal. Checked resistance all the powers before I went on to my scope by each sensor has battery voltage as signal. So here's what I tried just changed my voltage to 20v and can detect battery voltage but still no signals from none of them....Any help would be greatly appreciated I am still new to pico so could be user complication but thanks

Post Reply