Ford Focus MK3 1.0 Ecoboost no spark.

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Dcunning35
TwoWaves
TwoWaves
Posts: 238
Joined: Thu Jan 28, 2016 12:33 pm

Re: Ford Focus MK3 1.0 Ecoboost no spark.

Post by Dcunning35 »

For a coil circuit I agree you would get a DTC however not always if the circuit is good from the pcm to the coils , double check the pcm powers and grounds if ok replace it

Mankke
OneWave
OneWave
Posts: 10
Joined: Sat Aug 01, 2020 6:05 pm

Re: Ford Focus MK3 1.0 Ecoboost no spark.

Post by Mankke »

I will do that.
Im going for a holiday today and be back after a few weeks, then im going to double check everything, I will tell you then what I did with the car. Thanks a lot so far!

Mankke
OneWave
OneWave
Posts: 10
Joined: Sat Aug 01, 2020 6:05 pm

Re: Ford Focus MK3 1.0 Ecoboost no spark.

Post by Mankke »

This problem solved, the swap engine had a timing issue.

Roadangel9
Newbie
Posts: 3
Joined: Tue Jan 05, 2021 12:23 am

Re: Ford Focus MK3 1.0 Ecoboost no spark.

Post by Roadangel9 »

Can you please elaborate. I have the same problem. Bottom end rebuilt and now no spark or fuel on cylinders 1 and 3. Cylinder 2 is fine. Starts and cuts out as cannot run on one cylinder. Engine was timed using locking tools. Any help will, be appreciated as I'm now pulling out m hair in frustration!

Roadangel9
Newbie
Posts: 3
Joined: Tue Jan 05, 2021 12:23 am

Re: Ford Focus MK3 1.0 Ecoboost no spark.

Post by Roadangel9 »

Anyone?

User avatar
leonardorj
OneWave
OneWave
Posts: 27
Joined: Tue Mar 24, 2020 1:32 pm

Re: Ford Focus MK3 1.0 Ecoboost no spark.

Post by leonardorj »

Este arquivo abre em qual programa ?

Roadangel9
Newbie
Posts: 3
Joined: Tue Jan 05, 2021 12:23 am

Re: Ford Focus MK3 1.0 Ecoboost no spark.

Post by Roadangel9 »

Retimed engine again today. Crank pulley locator is damaged on the timing cover. I locked it as close as I can to the centre and the same problem persists!! Any help would be appreciated.

Dcunning35
TwoWaves
TwoWaves
Posts: 238
Joined: Thu Jan 28, 2016 12:33 pm

Re: Ford Focus MK3 1.0 Ecoboost no spark.

Post by Dcunning35 »

Change the timing cover if you can't pin the tone ring in position you won't ever be able to ensure the electrical timing and valve timing match , also for ease as the crank pulley can creep when torquing up with the torque multiplier fit the steel shim on the front of the crankshaft gear .

ManseltonMot
Newbie
Posts: 1
Joined: Sun Nov 17, 2019 11:09 am

Re: Ford Focus MK3 1.0 Ecoboost no spark.

Post by ManseltonMot »

Very helpful thread 👏
Diagnosed wrongly timed engine from the engine supplier with the suggestions posted here thanks again guys

simb7
Newbie
Posts: 1
Joined: Tue Jun 28, 2022 11:05 am

Re: Ford Focus MK3 1.0 Ecoboost no spark.

Post by simb7 »

@ Mankke and @ManseltonMot - Can you specify who the engine provider was so we know to avoid or double check their work?

Post Reply