Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
Posts: 5
Joined: Thu Jan 07, 2021 12:09 pm


Post by jibby365 »

Hello I have a TA167. Is it possible to get a new circuit board with bnc lead and battery lead all together to replace in my clamp? I’d rather not buy a whole new clamp if I don’t have to.

Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 1210
Joined: Sun Aug 25, 2013 7:22 am

Re: TA167

Post by Steve Smith »

Hello and thank you for the post and sorry for such a late reply

Unfortunately, the components of the TA167 are not available for individual purchase via Pico

If the clamp is therefore beyond economical repair, the only alternative is a replacement clamp

I hope this helps, take care.....Steve

Post Reply