messed up relative compression wave form, what is wrong?

Ask any non-NVH related questions about using PicoDiagnostics software here.
MAE
OneWave
OneWave
Posts: 20
Joined: Wed May 01, 2013 7:16 am

Re: messed up relative compression wave form, what is wrong?

Post by MAE »

Yes using the supplied USB cable

Martyn
Pico Staff Member
Pico Staff Member
Posts: 359
Joined: Thu Aug 11, 2011 7:43 am
Location: Cambridgeshire

Re: messed up relative compression wave form, what is wrong?

Post by Martyn »

Please post the psdata file so that we can take a closer look.
Martyn
Technical Support Manager

MAE
OneWave
OneWave
Posts: 20
Joined: Wed May 01, 2013 7:16 am

Re: messed up relative compression wave form, what is wrong?

Post by MAE »

sorry im new to pico, is the file you are after a saved image of the scope in operation?

Martyn
Pico Staff Member
Pico Staff Member
Posts: 359
Joined: Thu Aug 11, 2011 7:43 am
Location: Cambridgeshire

Re: messed up relative compression wave form, what is wrong?

Post by Martyn »

Yes.

File>SaveWaveform and save as a psdata file then we can open it in the software and look at settings and detail.
Martyn
Technical Support Manager

MAE
OneWave
OneWave
Posts: 20
Joined: Wed May 01, 2013 7:16 am

Re: messed up relative compression wave form, what is wrong?

Post by MAE »

this is a file from hooking the scope straight to battery on the floor not connected to anything, as you can see its all over the place. sorry for late response, been very busy

MAE
OneWave
OneWave
Posts: 20
Joined: Wed May 01, 2013 7:16 am

Re: messed up relative compression wave form, what is wrong?

Post by MAE »

i cant get the file to upload, any help?

Martyn
Pico Staff Member
Pico Staff Member
Posts: 359
Joined: Thu Aug 11, 2011 7:43 am
Location: Cambridgeshire

Re: messed up relative compression wave form, what is wrong?

Post by Martyn »

How large is the file ?
Martyn
Technical Support Manager

RonMcleod
Newbie
Posts: 4
Joined: Thu Aug 26, 2010 8:14 am

Re: messed up relative compression wave form, what is wrong?

Post by RonMcleod »

Hi
I had a similar problem and it was because I opened Pico before I plugged the charger into the mains, I found if I hook the Pico up AFTER I plugged the charger in it was fine.

Ron

Post Reply