An ignition question

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Bubeh
Newbie
Posts: 9
Joined: Mon Sep 22, 2014 1:27 pm

Re: An ignition question

Post by Bubeh »

I just opened my PICO advance 4 channel kit and confused which lead wires to use to check the coil of a Saturn 2.2 L with a PO300. I did a test light on the ignition module and feed is okay as well as the two negative pins. I want to test now the coil module as an ohm test is no guarantee. Thank you.

hijakd
OneWave
OneWave
Posts: 19
Joined: Wed Jun 25, 2014 1:38 pm

Re: An ignition question

Post by hijakd »

hi there,you question is a little vague,anyways if your wanting to test your ignition system then first check signal/primary with an attenuator AND NORMAL TEST LEAD if the signal is ok,check power and grounds to the coil,if that's ok and still no output then coil needs to be thrown in the bin

Post Reply