Compare waveform with different frequency

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
hbr
TwoWaves
TwoWaves
Posts: 60
Joined: Tue Nov 08, 2011 10:15 pm

Compare waveform with different frequency

Post by hbr »

Hello. I want to compare a waveform with another reference waveform, but they where made with different frequencies, is there a way to change the frequency of the reference waveform so I can compare them.

User avatar
Autonerdz
TwoWaves
TwoWaves
Posts: 387
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Re: Compare waveform with different frequency

Post by Autonerdz »

You can easily compare signals of different frequencies using scope views. Alternatively, you can compare using two instances of PicoScope.
Tom Roberts
(The Picotologist)
Autonerdz

hbr
TwoWaves
TwoWaves
Posts: 60
Joined: Tue Nov 08, 2011 10:15 pm

Re: Compare waveform with different frequency

Post by hbr »

Thanks autonerdz, it works indeed if you zoom both so they look the same you can compare them, but I wanted to know if you cab change the signal with math channels so you can overlay the waveforms to compare them.

Post Reply