Come here to introduce yourself, who you are, what you do, and tell us your
experience with our automotive products.
Hi to everyone,
i'm a newbite and i'm lookig for a fixing kit for the Picoscope series 6000 and 3000. My target is fix into my inox box several Picoscope 6404 and 3406 for build an acquisition box.
Usually the alluminiun extruded manufacturer give an optional flange end panels and with it i can fix my scope.
There is a way to know the manifacturer of the allumium extruded box or any suggestion to resolve my problem?
Thanks in advance.
- Posts: 1
- Joined: Mon Dec 03, 2012 5:19 pm
This query is best asked on the Pico Test & Measurement forum, at http://www.picotech.com/support/
You may get lucky and get a response on here, but I would ask the same question on the above forum.
Technical Author @ Pico Technology UK
- Pico Staff Member
- Posts: 308
- Joined: Mon Jan 31, 2011 11:22 am
- Location: UK
Return to Introductions
Who is online
Users browsing this forum: No registered users and 2 guests