The PicoDiagnostics result is odd

Ask any non-NVH related questions about using PicoDiagnostics software here.
Post Reply
eric989
OneWave
OneWave
Posts: 35
Joined: Fri Apr 16, 2010 6:53 am
Location: Hongke China

The PicoDiagnostics result is odd

Post by eric989 »

My PicoDiagnostics version is: 1.4.55 build 6. I found that I load a same data file for several times, and it displays different results at first screen. I will upload the file here. You can load it and close it for several times. Sometimes you need to shut down the whole software.
image001.png
Fig. A The first screen is shown a very bad contribution. But when playing, the bars go up to 90% and more.
image005.png
Fig. B
image007.png
Fig. C
image009.png
Fig. D show total engine cycles is 1745. But Fig. A/B/C show 2150. And there is a red Error on it.
image011.png
Fig. E
image013.png
Fig. F
Eric Chen
Hongke Technology,China

eric989
OneWave
OneWave
Posts: 35
Joined: Fri Apr 16, 2010 6:53 am
Location: Hongke China

Re: The PicoDiagnostics result is odd

Post by eric989 »

seems that the size of the data file is too large for the forum, 14.3MB, cann't upload it.
Eric Chen
Hongke Technology,China

Post Reply