Vectra Crankshaft sensor help!

If you are not a PicoScope user and want advice with a diagnostic problem then post here. Forum members may be able to help.
bullstar12
Newbie
Posts: 3
Joined: Sun Jan 06, 2013 6:26 pm

Re: Vectra Crankshaft sensor help!

Post by bullstar12 »

Thanks for everyone's reply and help but It did turn out to be the sensor so replaced and the car ran fine, Well the car ended up in a ditch a week later and was a total loss :oops:
Yes a good point on the y 2.0 DTH engine about pump and sensor and they do have issues and should be checked accordingly, Thanks Colin.

Post Reply