600amp clamp problem

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.

600amp clamp problem

Postby Damian Mc Bride » Wed Oct 31, 2012 1:31 pm

Hi i tried to use my 600amp clamp(TA019) yesterday, when i switch it on it reads off the scale on 600amp setting, or reads 5.6volts on voltage scale without being connected to car :cry:
My question is can these be tested/fixed or is it not worth the bother should i just order a new one.
I did open it last night but didnt see anything that looked damaged so put back together again.
Ps the first thing i tried was a new battery and still the same.
Regards Damian
Damian Mc Bride
User
User
 
Posts: 39
Joined: Sat Sep 03, 2011 8:50 am

Re: 600amp clamp problem

Postby Damian Mc Bride » Tue Nov 06, 2012 8:24 pm

Ordered a new one today
Damian
Damian Mc Bride
User
User
 
Posts: 39
Joined: Sat Sep 03, 2011 8:50 am


Return to Automotive kit hardware

Who is online

Users browsing this forum: No registered users and 0 guests