4 channel pico attenuators

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.

4 channel pico attenuators

Postby JIMMILLINER » Wed Jun 13, 2012 12:48 pm

If you use 4 attenuators on an automotive pico , say to monitor 4 injectors or primary ignition signals ; is there any signal degradiaton or interference?
JIMMILLINER
Newbie
 
Posts: 3
Joined: Tue May 08, 2012 5:11 am

Re: 4 channel pico attenuators

Postby Autonerdz » Wed Jun 13, 2012 3:03 pm

Hi Jim,

No, there is no signal degradation, provided that the attenuators are attached directly to the scope module and the scope is grounded to bat neg.
Tom Roberts
(The Picotologist)
Autonerdz
User avatar
Autonerdz
Zen Master
Zen Master
 
Posts: 265
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Re: 4 channel pico attenuators

Postby JIMMILLINER » Sat Jun 16, 2012 2:14 am

thanks :D
JIMMILLINER
Newbie
 
Posts: 3
Joined: Tue May 08, 2012 5:11 am


Return to Automotive kit hardware

Who is online

Users browsing this forum: No registered users and 0 guests