Beta 6.7 - Problem with Filter and older Waveforms

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
stefan1961
Newbie
Posts: 1
Joined: Sat Apr 28, 2012 8:26 pm

Beta 6.7 - Problem with Filter and older Waveforms

Post by stefan1961 »

Hi,

I just tested the 6.7 Beta Version.
When i load a Waveform taken with the 6.6.xx, it is displayed,
but i can´t turn on the Filter in the Channels Menus.
If i load the Waveforms with the 6.6.18 oder 6.6.23
i can activate the filter when viewing the Files...

Would be nice if that could be fixed.

Greets Stefan

User avatar
Autonerdz
TwoWaves
TwoWaves
Posts: 387
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Re: Beta 6.7 - Problem with Filter and older Waveforms

Post by Autonerdz »

Stefan,

How exactly are you opening files? I suspect that you are double clicking on them. Try opening PicoScope first and say yes to demo. Then use file/open within PicoScope to browse to the file and open it. This should allow you to filter. This has always been the best way to open a data file. This way also fills in the settings if you don't have the scope plugged in.
Tom Roberts
(The Picotologist)
Autonerdz

Post Reply