trace looks like wide paint brush?

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
hansimports
Newbie
Posts: 1
Joined: Tue Oct 18, 2011 1:47 am

trace looks like wide paint brush?

Post by hansimports »

I am a first time user with this pico scope.
Not sure if my problem is hardware, software or me??
No matter what setting i select, the traceline (O2 sensor) looks like it has been done with a super wide paintbrush.
Any suggestion would be appreciated.
Hans


HANSIMPORTS
HUNTINGTON BEACH
CALIFORNIA

User avatar
Autonerdz
TwoWaves
TwoWaves
Posts: 387
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Re: trace looks like wide paint brush?

Post by Autonerdz »

Hi Hans,

Hard to say without seeing the data file, but most likely you have sample rate too high for the O2 sensor. Turn it down, or apply some low pass filter. What version of PicoScope are you using? Found under Help/About.
Tom Roberts
(The Picotologist)
Autonerdz

Post Reply