new member

Come here to introduce yourself, who you are, what you do, and tell us your
experience with our automotive products.

new member

Postby david cant » Fri Jun 24, 2011 7:13 am

hello to all on this site, my name is david cant, i am new to the picoscope ,i run my own garage in east kilbride just outside glasgow ,i have ten staff who carry out general service and repair work alongside our mot set up,i myself carry out most of the diagnostic work...up till now i have been using the fluke 190 two channel scope and the 4 channel scope built into my carrman vg,but have always had a notion for the pico ,...i also run dtc training centre providing diagnostic training for the independent motor trade in scotland, i am a member of the frank massey network and have done most of my training with ads,bosch,xpoentia,dc mcall,sun ect...hope i am able to put some input into this forum that is of help to others.....we often get stuck sometimes and these professional forums often provide a lifeline...david.
david cant
Newbie
 
Posts: 1
Joined: Thu Jun 23, 2011 5:51 pm

Re: new member

Postby AuthorMike » Mon Jun 27, 2011 8:19 am

Hi David,

Welcome to the forum! :mrgreen:
Mike Valentine
Technical Author @ Pico Technology UK
AuthorMike
Pico Staff Member
Pico Staff Member
 
Posts: 294
Joined: Mon Jan 31, 2011 11:22 am
Location: UK

re:

Postby Soldusedo » Mon Jul 04, 2011 7:37 pm

+1
Soldusedo
Newbie
 
Posts: 1
Joined: Sat May 14, 2011 5:36 am
Location: Italy

Re: new member

Postby tazz » Sun Jul 10, 2011 11:03 pm

Hello guys. I am from Argentina. I have an authorized Fiat garage.
Unfortunetly Pico autoscope is not one of my tools, but the technycs taken by yours to solve the variable problems in
automobiles are the most compregensive i ever sow.
I have various autoscopes but no one of this has the aptitudes of Pico. I hope learn very much participating in piccoforum.
Thank you and sorry my english.
tazz
Newbie
 
Posts: 1
Joined: Sun Jul 10, 2011 2:37 pm

Re: new member

Postby amcutem » Thu Sep 29, 2011 5:03 am

Hi, my name is Alex and I own a pico scope...

I hope this forum can increase my knowledge so that I can fully utilize pico's capability...
amcutem
Newbie
 
Posts: 3
Joined: Fri Jun 06, 2008 11:24 pm
Location: Richmond

Re: new member

Postby AuthorMike » Tue Oct 04, 2011 7:49 am

Welcome to all of you :)

Please feel free to start your own introduction thread, and to add threads in other forum sections :)

There is a wealth of knowledge on the forum, and many of our members are happy to help!
Mike Valentine
Technical Author @ Pico Technology UK
AuthorMike
Pico Staff Member
Pico Staff Member
 
Posts: 294
Joined: Mon Jan 31, 2011 11:22 am
Location: UK


Return to Introductions

Who is online

Users browsing this forum: No registered users and 2 guests