Compression Test Signal Graph

Jabsam · Post by **Jabsam** » Tue May 10, 2011 10:05 am

Hi all,

I right-click the compression bar graph,and select the "Signal" to bring up a Signal Graph.Could you tell me what is the meaning of the Signal Graph ? Thanks in advance !

Brian Haley · Post by **Brian Haley** » Tue May 10, 2011 4:06 pm

Hi Jabsam,

From what I understand, the bumps represent the acceleration of engine RPM for each cylinder firing event.

You could use a sync probe or secondary lead on channel B as a reference point to help narrow down the faulty cylinder as shown here.

Jabsam · Post by **Jabsam** » Wed May 11, 2011 1:11 am

Brian Haley wrote: You could use a sync probe or secondary lead on channel B as a reference point to help narrow down the faulty cylinder as shown here.

Thanks，Brian。It help me much.Cheers

Gary20202 · Post by **Gary20202** » Sat Jan 31, 2015 2:26 am

How do you connect the sync probe, I have tried and never see the sync signal on the channel B. Obviously I am missing something in my setup.

Thanks for any help.

Gary

Automotive Forum

Compression Test Signal Graph

Compression Test Signal Graph

Re: Compression Test Signal Graph

Re: Compression Test Signal Graph

Re: Compression Test Signal Graph