does anyone have a custom probe for Fluke pv350?

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
andyz
Newbie
Posts: 2
Joined: Sat Aug 21, 2010 2:15 pm

does anyone have a custom probe for Fluke pv350?

Post by andyz »

Hi everyone,
This is my first post so be gentle please.
If somebody has made a pv350 custom probe I'd be very grateful if I could 'borrow' it.
I've been having a go at making one myself, but as a beginner with scope, i'm finding it a bit of a challenge.
Thanks

User avatar
Autonerdz
TwoWaves
TwoWaves
Posts: 387
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Re: does anyone have a custom probe for Fluke pv350?

Post by Autonerdz »

Sure, Andy. Email me and I'll send you the PV350 probes.

_________________
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America

andyz
Newbie
Posts: 2
Joined: Sat Aug 21, 2010 2:15 pm

Re: does anyone have a custom probe for Fluke pv350?

Post by andyz »

Thanks Tom,

The probes are great.

It's very reassuring to know there are people such as yourself who are prepared to help the pico beginners.
I'll have to do some more reading to get to grips with creating my own custom probes.
If anyone has any helpful hints, feel free to share :D

User avatar
georgeku
Newbie
Posts: 8
Joined: Wed Sep 24, 2008 6:43 pm
Location: San Francisco, CA, USA

Re: does anyone have a custom probe for Fluke pv350?

Post by georgeku »

Hi Tom

Would you mind to send one for me? I am also struggling on how to make it. My email is georgeku@yahoo.com. thanks.


George

User avatar
Autonerdz
TwoWaves
TwoWaves
Posts: 387
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Re: does anyone have a custom probe for Fluke pv350?

Post by Autonerdz »

On the way, George. :)

_________________
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America

924marc
Newbie
Posts: 3
Joined: Mon Sep 03, 2007 11:27 am

Re: does anyone have a custom probe for Fluke pv350?

Post by 924marc »

Hi Tom
Would you mind to send one for me?
My email is 924marc@gmail.com.

Thank you very much.

Regards
Marc

User avatar
Autonerdz
TwoWaves
TwoWaves
Posts: 387
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Re: does anyone have a custom probe for Fluke pv350?

Post by Autonerdz »

On the way, Marc.

These are SAE but for metric, just change the name. The converson factor is the same.
Tom Roberts
(The Picotologist)
Autonerdz

andyz
Newbie
Posts: 2
Joined: Sat Aug 21, 2010 2:15 pm

Re: does anyone have a custom probe for Fluke pv350?

Post by andyz »

Hi Tom,

I know we've been down this road before, but could I trouble you for the pv350 custom probe again.
Bit of a long story, but I managed to lose all my Pico files etc. :cry:

Many thanks

Andy

User avatar
Autonerdz
TwoWaves
TwoWaves
Posts: 387
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Re: does anyone have a custom probe for Fluke pv350?

Post by Autonerdz »

Done, Andy. Check your email. 8)
Tom Roberts
(The Picotologist)
Autonerdz

andyz
Newbie
Posts: 2
Joined: Sat Aug 21, 2010 2:15 pm

Re: does anyone have a custom probe for Fluke pv350?

Post by andyz »

Thanks Tom,

Much appreciated. :D

Andy Z

Post Reply