P-V diagram

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
eki
Newbie
Posts: 0
Joined: Sun Aug 15, 2010 11:00 am

P-V diagram

Post by eki » Sun Aug 15, 2010 11:09 am

Has anybody (Pico 6 software/2204) an application for measuring petrol engine cylinder pressure while running and viewed it as "carnot circle" P-V diagram.

rgds Eki

PeterF
OneWave
OneWave
Posts: 21
Joined: Thu Jun 07, 2007 10:53 am
Location: Cambridgeshire

Re: P-V diagram

Post by PeterF » Wed Dec 29, 2010 11:46 am

Hi,
The standard PicoScope6 application would be able to display this using X/Y mode but you would need to supply two input signals, one of cylinder pressure (instrumented spark-plug?) & one of crank-angle.
Regards,
PeterF.

Post Reply