Pico Diagnostics Software Release(Beta)

Ask any non-NVH related questions about using PicoDiagnostics software here.

Pico Diagnostics Software Release(Beta)

Postby Michael » Tue Oct 31, 2006 2:12 pm

Pico Technology is proud to announce the arrival of Pico Diagnostics, our advanced Automotive Diagnostics software.

Please feel free to download and test the software on as many vehicles you wish. All feedback must be posted to the Pico Diagnostics(Beta) forum and remember, this is a Beta version. So please post your comments or issues.

We will be restricting the posts to registered members only to prevent spam posters.

Please visit our Pico Labs website for downloads and further information.
http://labs.picotech.com/

Many thanks and have fun.
Pico Technology Ltd.
Michael - Tech Support
Pico Technology
Web Support Forum
Michael
User
User
 
Posts: 21
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

error downloading

Postby pannhead » Fri Nov 03, 2006 4:36 am

I attempted to down load the program and during the install process I received a "error occured downloading the dotnetfx.exe file, retry?"
I retried to no avail, I checked and updated my windows and tried again, same result !!?? help!!

Thank you.
pannhead
Newbie
 
Posts: 2
Joined: Fri Nov 03, 2006 4:30 am
Location: Raleigh,NC

Postby Erik » Fri Nov 03, 2006 11:48 am

Make sure you are connected to internet when running the installer.

If you still have problems with a file named “dotnetfx.exeâ€
Erik
Pico Staff Member
Pico Staff Member
 
Posts: 3
Joined: Mon Oct 23, 2006 8:16 am
Location: Cambridgeshire, UK

got it !

Postby pannhead » Sat Nov 04, 2006 12:05 am

Thanks Erik!!, you were absolutely correct, I down loaded .NET 2.0 and the program loaded without a hitch !!

Thanks.
pannhead
Newbie
 
Posts: 2
Joined: Fri Nov 03, 2006 4:30 am
Location: Raleigh,NC

Re: Pico Diagnostics Software Release(Beta)

Postby Guest » Fri Nov 13, 2009 4:39 pm

Hi! I have just purchased a picoscope 4000 advance diagnostic kits for my company. On top of it, I've installed the latest pico diagnostic software. I've also notice that the latest beta software can support up to 12 cylinders, which we mainly dealing on bentley car which also running on W12 engine. But when I run a cylinder balance or compression test, the software unable to capture any data and prompt for a error message. As I now surfing from my blackberry, I couldn't do a screenshot in this reply. I'll post it once I'm back in the workshop.
Guest
 


Return to PicoDiagnostics software

Who is online

Users browsing this forum: No registered users and 0 guests