PicoScope 7 Automotive
Available for Windows, Mac, and Linux, the next evolution of our diagnostic scope software is now available.
Crankshaft sensor
Crankshaft sensor
Hi
I have changed the timing belt on a Peugeot 5008 with a 1.6 hdi 9hz engine
Now the car won't start. I am absolutely sure that the timing belt is installed correctly
I get an error code that there is a mismatch between the crank sensor and camshaft sensor.
It looks like there is a break in the reluxation ring at approx. 138 degrees
Could this be the reason the engine won't start?
I have changed the timing belt on a Peugeot 5008 with a 1.6 hdi 9hz engine
Now the car won't start. I am absolutely sure that the timing belt is installed correctly
I get an error code that there is a mismatch between the crank sensor and camshaft sensor.
It looks like there is a break in the reluxation ring at approx. 138 degrees
Could this be the reason the engine won't start?
- Attachments
-
- Crankshaft sensor.psdata
- (22.56 KiB) Downloaded 196 times
Re: Crankshaft sensor
I don't think is related and I don't think 2204 is up to the task the way it's setup. Way too long time and way too low resolution.