How to add psdata files

Please post any comments related to the use of the forum here
Post Reply
Tomblueprintauto
OneWave
OneWave
Posts: 11
Joined: Fri Oct 01, 2021 4:06 am

How to add psdata files

Post by Tomblueprintauto »

I tried to upload a capture just before but it keeps telling me that the file is too big?

Its only a single page that had been saved so pretty hard to make the file any smaller. Is there a way to save a capture in a slightly lower quality or something?

ben.martins
Pico Staff Member
Pico Staff Member
Posts: 539
Joined: Tue May 16, 2017 1:02 pm

Re: How to add psdata files

Post by ben.martins »

Hi Tom,

If the file is too large to upload you can select to save just the one buffer of interest. You will then get an idea of the file size indicated below.
Save all vs save current.png
In the image above we can see that when saving all we have a file size of 12MB. If saving just the current buffer the file size is reduced to 4MB. If in any doubt you could always upload your file to the waveform library where once all the information is filled out, can be opened by anyone anywhere in the world.

Hope this helps.

Kind regards

Ben

Post Reply