Mazda Axela 2.3 turbo -2007

German · Post by **German** » Thu Jul 28, 2022 1:39 am

Hi Team,

I need to measure the high pressure of this Mazda (petrol) as my signal on my rail pressure sensor is at 0.5 volts ,even when I rev vehicle.(Splatters and rev)

Does anyone know the pressure from this high pressure pump -the specs.

Also I have the WPS500X and the wps600 hydraulic transducer.

Regards.

vasek · Post by **vasek** » Thu Jul 28, 2022 12:23 pm

Hello.
Here You go :

German · Post by **German** » Fri Jul 29, 2022 5:31 am

Hi,
Thanks mate. How can I rule out if it is low pump pressure on the high pressure outlet. My primary pressure was 2bars and I replace fuel pump in tank is now sitting at 4 bars.
My live data pressure on pressure sensor is displaying 300000 pascal-when converted about 3 bars.

Just will like to know if there is any way to test the high pressure ,will like to pin point faulty component.

Any ideas/help or lesson/teaching material will really welcome.

Regards

vasek · Post by **vasek** » Fri Jul 29, 2022 8:19 am

https://mega.nz/file/slhGhS6a#aVBRNh3Zo ... k8-dztZ9og

PicoScopes
& kits

For vehicle manufacturers

EV kits and
accessories

Noise, Vibration and Balancing

Milliohm tester

Pressure sensors

Current clamps

Breakout
leads/boxes

Accessories

Automotive Forum