question

Ask any questions about using the new PicoScope 7 Automotive software here.
Post Reply
jacolino
Newbie
Posts: 3
Joined: Sat Jun 18, 2022 4:37 am

question

Post by jacolino »

Hello, my question may be childish, but I do not know how to set the current waveform buffer in PS7 so that the current buffer is separated from the previous one with such a bar.
Top
Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 1587
Joined: Sun Aug 25, 2013 7:22 am

Re: question

Post by Steve Smith »

Hello and thank you for the post

This is far from a childish question and one I am please you have asked

Could I confirm we are discussing "Display previous waveform" as we have here https://www.picoauto.com/library/training/filtering and selected in PS6 as below:
Image 1
Image 1
I will sit tight for your feedback

Take care......Steve
Top
jacolino
Newbie
Posts: 3
Joined: Sat Jun 18, 2022 4:37 am

Re: question

Post by jacolino »

Thanks for the answer Steve, that's what I meant, and how do I enable this feature on the PS7?
Top
Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 1587
Joined: Sun Aug 25, 2013 7:22 am

Re: question

Post by Steve Smith »

Hello and thank you for the feedback

This is an interesting topic as when PS7 was first released, Streaming mode (200 ms/div and slower) displayed the previous waveform by default!

This was met with a number of concerns raised by users who perhaps had not seen or used this feature before

A new feature request was raised to have this as an optional feature (which is perfect) but it would appear we turned this off and placed the feature request in the "backlog" for triage post parity with the major features of PS6

We will continue to drive this request within the relevant software team ASAP

I hope this helps, take care.....Steve
Top
Post Reply

Return to “PicoScope 7 Automotive software”