feature request: scope views and waveform frames' scrolling

tintoverano · Post by **tintoverano** » Thu Mar 24, 2022 1:37 pm

hi,

it would be useful to be able to lock the current frame in a scope view, whereas in the other opened scope view the user could still scroll frames

use case: I'm seeing a pattern and want to check whether it exists on other frames w/o scrolling back and forth

I was trying this on a Mac, so sorry if this was available on Windows (using both OSs)

thanks

zoli

Post by **ben.martins** » Fri Mar 25, 2022 10:16 am

Hi Zoli,

Thank you for the suggestion and I will get it into the software teams.

Whilst not an easy option there is a workaround using the reference waveform feature. If you were to have both view open as you've done so in your image, create a reference of the top panel and then hide the other channels apart from the reference.

This will 'fix' the waveform in the top view whilst scrolling through the waveform buffer appears in the lower panel. Hopefully the attached video demonstrates this.

Reference and views.mp4: (2.72 MiB) Downloaded 155 times

Thank you again and keep the ideas coming!

Kind regards

Ben

tintoverano · Post by **tintoverano** » Fri Mar 25, 2022 12:36 pm

thanks Ben! I didn't think of that

this should work while waiting for the feature to appear

zoli

PicoScopes
& kits

For vehicle manufacturers

EV kits and
accessories

Noise, Vibration and Balancing

Milliohm tester

Pressure sensors

Current clamps

Breakout
leads/boxes

Accessories

Automotive Forum