Measurement between rulers

Ask any questions about using the new PicoScope 7 Automotive software here.
Post Reply
R8évolution
OneWave
OneWave
Posts: 15
Joined: Sat Aug 15, 2020 7:30 pm

Measurement between rulers

Post by R8évolution »

Hello, on the measurement of the RCO of a fuel pressure regulator., by analyzing my capture after measurement I realized that the measurement between the rules of the waveform is not available under pico7.
Will it be available soon?

R8évolution
OneWave
OneWave
Posts: 15
Joined: Sat Aug 15, 2020 7:30 pm

Re: Measurement between rulers

Post by R8évolution »

Nobody to answer me ?

R8évolution
OneWave
OneWave
Posts: 15
Joined: Sat Aug 15, 2020 7:30 pm

Re: Measurement between rulers

Post by R8évolution »

I found sorry for this useless post

User avatar
Rfmotors1
TwoWaves
TwoWaves
Posts: 86
Joined: Fri Aug 31, 2012 8:14 am

Re: Measurement between rulers

Post by Rfmotors1 »

Hi,
I have tested on latest early version and it works normally, you only need to move in the screen the rulers from left bottom corner and switch the measurement from full trace to between rulers once it's added.
Hope it helps.
Roman

Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 1581
Joined: Sun Aug 25, 2013 7:22 am

Re: Measurement between rulers

Post by Steve Smith »

Hello and thank you for the posts, sorry for the late reply

The following image will help and I will add more info ASAP
Image 1
Image 1

I hope this helps, take care......Steve

R8évolution
OneWave
OneWave
Posts: 15
Joined: Sat Aug 15, 2020 7:30 pm

Re: Measurement between rulers

Post by R8évolution »

Thank you for the answers I could measure between the rulers during my next test :)

Post Reply