Hello, on the measurement of the RCO of a fuel pressure regulator., by analyzing my capture after measurement I realized that the measurement between the rules of the waveform is not available under pico7.
Will it be available soon?
Measurement between rulers
-
R8évolution
- OneWave
- Posts: 14
- Joined: Sat Aug 15, 2020 7:30 pm
Re: Measurement between rulers
Nobody to answer me ?
-
R8évolution
- OneWave
- Posts: 14
- Joined: Sat Aug 15, 2020 7:30 pm
Re: Measurement between rulers
I found sorry for this useless post
Re: Measurement between rulers
Hi,
I have tested on latest early version and it works normally, you only need to move in the screen the rulers from left bottom corner and switch the measurement from full trace to between rulers once it's added.
Hope it helps.
Roman
I have tested on latest early version and it works normally, you only need to move in the screen the rulers from left bottom corner and switch the measurement from full trace to between rulers once it's added.
Hope it helps.
Roman
-
Steve Smith
- Pico Staff Member
- Posts: 1417
- Joined: Sun Aug 25, 2013 7:22 am
Re: Measurement between rulers
Hello and thank you for the posts, sorry for the late reply
The following image will help and I will add more info ASAP
I hope this helps, take care......Steve
The following image will help and I will add more info ASAP
- Image 1
I hope this helps, take care......Steve
-
R8évolution
- OneWave
- Posts: 14
- Joined: Sat Aug 15, 2020 7:30 pm
Re: Measurement between rulers
Thank you for the answers I could measure between the rulers during my next test 