Is PICO 4425 Filtering?

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
Posts: 11
Joined: Thu May 19, 2016 2:17 pm

Is PICO 4425 Filtering?

Post by maxgas »

Moved to "Automotive kit hardware"
Last edited by maxgas on Fri Feb 18, 2022 6:31 pm, edited 2 times in total.

User avatar
Posts: 1
Joined: Tue Feb 09, 2016 5:30 pm

Re: Is PICO 4425 Filtering?

Post by TrevorSchlientz »

Try adding an attenuator between your test lead and the scope.

The 4425 has a 1M ohm impedance. This means that your scope will flow a small amount of current from your test point to your reference (ground) point. Adding the TA197 attenuator will increase your impedance to 9M ohms which will reduce the load (current) on your signal.

Post Reply