LEMO cable differential probe

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
bokn
Newbie
Posts: 3
Joined: Wed Feb 09, 2022 3:05 pm

LEMO cable differential probe

Post by bokn »

These LEMO power leads for the differential probe, are they intended to be connected to the picoscope 4425A? I can see a white blob at the back of the scope image on the website, but the image resolution is just too terrible to make out what it is. By the way, it would be great if you guys increased the resolution of the images on the website...

https://www.picotech.com/accessories/ac ... ower-cable

If not, is there a way to power the probe through USB, I read in the manual that the input must be at least 4.4V, so 5V USB output should work fine?
Top
Martyn
Pico Staff Member
Pico Staff Member
Posts: 361
Joined: Thu Aug 11, 2011 7:43 am
Location: Cambridgeshire

Re: LEMO cable differential probe

Post by Martyn »

The 4425a does not have a power output for probes. Our probes that use a Lemo supply require 6V 60mA or 9V 40mA as specified in the specification.
Martyn
Technical Support Manager
Top
Post Reply

Return to “Automotive kit hardware”