Frequency counting and Probe mismatch

Ask any questions about using the new PicoScope 7 Automotive software here.
Post Reply
PicoBarney
Pico Staff Member
Pico Staff Member
Posts: 15
Joined: Tue Apr 24, 2018 12:34 pm

Frequency counting and Probe mismatch

Post by PicoBarney »

A less than ideal user experience has come to our attention when using Frequency counting with BNC+ probes (for example, when loading the Digital Air Mass Meter guided test):

After selecting setting up for Frequency counting with an attached x1 BNC+ probe and clicking Run you will be presented with a Probe mismatch dialogue saying that the x1 BNC+ probe is not compatible with the channel settings.

To continue with the selected settings and probe, click on the x1 BNC+ probe under the "Probe found" column in Probe mismatch. You will then be presented with a dialogue in which you can select Hz, to continue (see attached GIF).

Hope that helps,
Barney
Attachments
frequency-counting.gif

Post Reply