Error - File load integrity check failed - PS7 from Non-Automotive version of PS software

Ask any questions about using the new PicoScope 7 Automotive software here.
Post Reply
aguilarpro
Newbie
Posts: 3
Joined: Fri Sep 18, 2020 11:45 pm

Error - File load integrity check failed - PS7 from Non-Automotive version of PS software

Post by aguilarpro »

I used the generic scope in the 2204 family to get some captures and saved that file. I remember I saw this somewhere where I could not open the saved file with the new PS7 v7.0.87.9775 software. Is this a normal behavior? I can open the file using the PS6 v6.24.25.5247 Automotive software. I tried saving the file using the PS6 software to ensure that there is nothing wrong, it saved fine but I cannot open that same file with PS7.

Post Reply