PicoScope 7 Automotive
Available for Windows, Mac, and Linux, the next evolution of our diagnostic scope software is now available.
Help please
-
steveashcroft
- Newbie
- Posts: 4
- Joined: Sun Apr 23, 2017 1:28 pm
Help please
Can anyone explain what the results of channel A voltage ruler means in this position.
As I lift it it displays Kv as it is IE 2Kv,2.75Kv etc etc
Thanks
As I lift it it displays Kv as it is IE 2Kv,2.75Kv etc etc
Thanks
- Attachments
-
- Capture.PNG (7.38 KiB) Viewed 5945 times
Re: Help please
27880 V / 1000 = 27.88V
Not nice indeed but keeps your math sharp.
Not nice indeed but keeps your math sharp.
-
steveashcroft
- Newbie
- Posts: 4
- Joined: Sun Apr 23, 2017 1:28 pm
Re: Help please
HI,
Thanks for the reply.
Confusing as it actually says 27.88 at the start of the reading. So why all the division and sq root stuff? Plus the minis 3Kv?
Thanks for the reply.
Confusing as it actually says 27.88 at the start of the reading. So why all the division and sq root stuff? Plus the minis 3Kv?
Re: Help please
That is not 3KV rather 10 at power of -3.
Again, not the best choice of showing a number agreed. As I’m not the designer, I can’t comment on the choices.
Again, not the best choice of showing a number agreed. As I’m not the designer, I can’t comment on the choices.
-
Steve Smith
- Pico Staff Member
- Posts: 1587
- Joined: Sun Aug 25, 2013 7:22 am
Re: Help please
Hello and thank you for the posts
I agree, the ruler legend and populated value do not lend itself to easy interpretation
Would you have the psdata file for this capture and if so could you post here?
Which version of PS7 was used for this capture?
Take care.....Steve
I agree, the ruler legend and populated value do not lend itself to easy interpretation
Would you have the psdata file for this capture and if so could you post here?
Which version of PS7 was used for this capture?
Take care.....Steve