SKODA 1.4 DIESEL ENG CODE CUTA

If you are not a PicoScope user and want advice with a diagnostic problem then post here. Forum members may be able to help.
Post Reply
JOE TECH
Newbie
Posts: 8
Joined: Wed Jan 29, 2014 8:40 pm

SKODA 1.4 DIESEL ENG CODE CUTA

Post by JOE TECH »

Hi looking for good crank+cam signals to check timing on 2015 Skoda 1.4 diesel eng code cuta
Engine fires but not start when cranking
Tried waveform library but did not find one for this model
Also fuel pressure waveform cranking would help
thanks Joe

ktl2019
OneWave
OneWave
Posts: 34
Joined: Fri Mar 19, 2021 3:42 pm

Re: SKODA 1.4 DIESEL ENG CODE CUTA

Post by ktl2019 »

Yesterday I had such car here, but look for timing mechanical. For fuel pressure, do it with disgnostic

JOE TECH
Newbie
Posts: 8
Joined: Wed Jan 29, 2014 8:40 pm

Re: SKODA 1.4 DIESEL ENG CODE CUTA

Post by JOE TECH »

Thanks for your help, yes I could check the timing mechanically which would take approx 1 hour
To check with scope approx 10 mins.I have taken a copy of cam + crank for future
Removed the top timing cover and everything looks ok
Fuel pressure is reaching the 200bar 1.volt but very erratic going from 1.5 volts to 0 which is enabling
the ecu to fire the injector intermittent but not start The pump is the bosch 4.1 single cylinder and I would
have liked to get a copy of fuel pressure cranking to see fit is erratic as a single cylinder unit
Thanks again for your reply Joe

Post Reply