Version 7.0.72.8244 (in case it's been fixed already)WIN 10
Working on an old Mazda today - following the directions here https://www.picoauto.com/library/automo ... 5-pin-dlc/ but not having it do the set up.
using 20v and a 10s/div Timebase I recorded 3 screens of waveform stopped and saved but it only saved a single (last screen). Tried again with the same result in that it would re-load the screen but the waveform count only reads 1. In the end I just had to save the 1 screen (which I now need to try and interpret - though I note that the ECU gnd seems to be less than stellar!)
Tried to add but the single screen file is 127MB!!
Thanks @krabkakes That explains it along with the 127Mb file size.
- I am guessing this is an unintended consequence of the new "sampling mode priority" default setting. Pico 6 would have reduced the sample rate to match the memory as it was not an option.
Maybe an auto setting that adjusts to give the sample rate that will allow the 32 frames.
I'll know for the next old car.
Thanks Steve - though without the explanation above that it was effectively user error, I'd have reported it as a bug!
If I had 20s /div or more, would the capture have stopped halfway through the screen - it appears so from the demo.
Slightly related I'm not sure how big the "gap" between buffer screens is, would I have captured the full set of error codes, bearing in mind a "1" is 400ms ?