If you are not a PicoScope user and want advice with a diagnostic problem then post here. Forum members may be able to help.
3 posts • Page 1 of 1
Hi we have got a this car in at the shop Keeps setting code p0335-92crankshaft sensor A circuit have resistance check sensor tests ok. Sensor has been changed and wiring looks ok. Have scoped Crank Cam and igniton coil 1.
Have a look into waveform library if you can find something similar. To me, crank signal does not look ok, you have either a ring teeth problem, or space too big between sensor and wheel, or an aftermarket sensor.
Just a thought, did you scope crank sensor at the sensor or the ECU the latter checks the complete circuit. Cheers Ron W