damaged my D channel, now what?

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
gogetta3
Newbie
Posts: 1
Joined: Sat Jan 16, 2021 6:00 am

damaged my D channel, now what?

Post by gogetta3 »

i have a 3423 (4 channel auto scope that i bought back in 2008 approx)

today i accidentally put spark voltage dirrect to channel 4..
a defective spark plug boot zapped my secondary pickup.. (yes i had it earthed)
at first no channels would work.. but after removing and having a lool inside the unit and putting it back together it works on channels A B C but D is no good..

i can see this being a relatively common problem.. as damaged and defective spark plug leads is not uncommon..

has anyone else had this happen and what was the cost to fix?

thanks
Top
Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 1586
Joined: Sun Aug 25, 2013 7:22 am

Re: damaged my D channel, now what?

Post by Steve Smith »

Hello and thank you for the post, sorry to hear about the issue surrounding channel D

We can repair this for you on site here at Pico UK (assuming the device is not beyond economical repair)

The cost is £192 Inc. VAT and £10 UK carriage. (The carriage cost would increase if overseas)

If the device is beyond economical repair then you will be offered a discount on a current replacement unit

I hope this helps, take care.....Steve
Top
Post Reply

Return to “Automotive kit hardware”