Manufacturer scopes

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
User avatar
c6dgreyl
Newbie
Posts: 1
Joined: Tue Dec 29, 2020 2:27 pm

Manufacturer scopes

Post by c6dgreyl »

Is it posenble to use my 4225A scope with manufacturer software like on the xentry tab for M Benz. The new scope the use is a pico scope and the software is pico but it does not pick up my scope. Only demo mode.

User avatar
PicoKev
TwoWaves
TwoWaves
Posts: 236
Joined: Thu Apr 05, 2012 9:16 am

Re: Manufacturer scopes

Post by PicoKev »

I suspect you will find the answer will probably be no! :(

Pico manufacture specific scopes and software for manufacturers to use within their licensed and propriety software. The hardware and software is locked together to prevent amongst other things the use of shall we say less than official software channels.

If you are a Mercedes-Benz tech using the official dealer system then you will need to contact your country specific dealer support team and they and only they will be able to help you.

Kev.

liviu2004
TwoWaves
TwoWaves
Posts: 472
Joined: Sat Mar 19, 2016 8:23 am
Location: Netherlands

Re: Manufacturer scopes

Post by liviu2004 »

As above, contracts are contracts, no mix.

Post Reply