Adc-100 used to analyse EMG signals

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
Guest

Adc-100 used to analyse EMG signals

Post by Guest » Wed Feb 22, 2006 10:40 am

Can I use the ADC-100 to collect EMG signals, ranging in mV and between 0 - 2000Hz.
Could I use the frequncy analyzer to look at frequncy components of the signal.

User avatar
ricardo
OneWave
OneWave
Posts: 25
Joined: Wed May 07, 2003 9:43 am

Post by ricardo » Thu Feb 23, 2006 3:08 pm

Hi ,

Is that EMG as in Electromyography? Not really familiar with these signals but the ADC-100 is certainly capable of sampling signals in the 0-2000Hz range. The spectrum analyzer function in PicoScope will allow you to look at the frequency components of the signal.

Best regards,

Ric
Ricardo Paloschi
Sales Engineer
Forum Moderator

Post Reply