probe atenuador

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
Marciooliveira
OneWave
OneWave
Posts: 19
Joined: Mon Jan 14, 2019 11:10 pm

probe atenuador

Post by Marciooliveira »

good morning everyone, i went to use my pico 4425 4 channels now and i came across something i'm using version 6.14.20 i went to analyze an ignition system and in the option of probes were the attenuators removed?

liviu2004
TwoWaves
TwoWaves
Posts: 472
Joined: Sat Mar 19, 2016 8:23 am
Location: Netherlands

Re: probe atenuador

Post by liviu2004 »

Printscreen please?

Marciooliveira
OneWave
OneWave
Posts: 19
Joined: Mon Jan 14, 2019 11:10 pm

Re: probe atenuador

Post by Marciooliveira »

print to panel probe
Attachments
pico1.jpg
pico.jpg

liviu2004
TwoWaves
TwoWaves
Posts: 472
Joined: Sat Mar 19, 2016 8:23 am
Location: Netherlands

Re: probe atenuador

Post by liviu2004 »

Second photo, do you see x10 x20 x100?

Marciooliveira
OneWave
OneWave
Posts: 19
Joined: Mon Jan 14, 2019 11:10 pm

Re: probe atenuador

Post by Marciooliveira »

yes

liviu2004
TwoWaves
TwoWaves
Posts: 472
Joined: Sat Mar 19, 2016 8:23 am
Location: Netherlands

Re: probe atenuador

Post by liviu2004 »

Yes, so attenuators are not removed.
All ok!

Can you maybe explain where the problem is?

Marciooliveira
OneWave
OneWave
Posts: 19
Joined: Mon Jan 14, 2019 11:10 pm

Re: probe atenuador

Post by Marciooliveira »

good morning friend, the problem is here look at version 6.14.5, look at the attenuators in the software 10: 1- 20: 1,note that even the coil on plug probe has been removed from version 6.14.20, and version 6.14.5 is present
Attachments
6.14.5.png

liviu2004
TwoWaves
TwoWaves
Posts: 472
Joined: Sat Mar 19, 2016 8:23 am
Location: Netherlands

Re: probe atenuador

Post by liviu2004 »

To me, it’s just a name x20 20:1 same thing.

Post Reply