PicoScope 7 Automotive
Available for Windows, Mac, and Linux, the next evolution of our diagnostic scope software is now available.
New Member/Snapon transducer use
-
mikejmardis
- Newbie
- Posts: 1
- Joined: Wed Apr 29, 2020 1:52 pm
New Member/Snapon transducer use
Hi all! Just received my new 4425a and I'm curious if anyone has used Snapon transducers with a Pico?
If so, what were the settings needed in probe set-up.
If there isn't anyone, would anyone be interested in what settings I find when I finish experimenting.
If so, what were the settings needed in probe set-up.
If there isn't anyone, would anyone be interested in what settings I find when I finish experimenting.
-
Steve Smith
- Pico Staff Member
- Posts: 1588
- Joined: Sun Aug 25, 2013 7:22 am
Re: New Member/Snapon transducer use
Hello and thank you for the post.
You can most certainly use your Snap On Pressure Transducer with the 4425A (or any other PicoScope for that matter)
You can create a custom probe as we describe here
We need to know the ouput of your probe in relation to pressure
i.e. 10 mV/Psi etc. as this will help to ensure the displayed value is correct.
Most certainly, when you are complete please feedback the results
I hope this helps, take care......Steve
You can most certainly use your Snap On Pressure Transducer with the 4425A (or any other PicoScope for that matter)
You can create a custom probe as we describe here
We need to know the ouput of your probe in relation to pressure
i.e. 10 mV/Psi etc. as this will help to ensure the displayed value is correct.
Most certainly, when you are complete please feedback the results
I hope this helps, take care......Steve