audi s3 with cjxc engine

Everyone loves a happy ending. Share your diagnostic success stories here.
Post Reply
carcare
Newbie
Posts: 1
Joined: Wed Mar 04, 2020 4:46 pm

audi s3 with cjxc engine

Post by carcare »

can any body help with a picture of wave form i should be getting for cam and crank sensors please.
have checked timing chain etc[car only done 35000 miles)
but still getting a p001609 bank 1 sensor a
swopped over inlet camshaft sensors ate rear of camshft,new valves in end of camshafts while we checked valve timing
odis says to check N205 valve,have swapped these over as ex and inlet the same
car runs like a dream,drives fine but every 3 rd turn of key flags this fault code.
wanted to see what i should be seeing on a scope if any body as any saved scope patterns
mike

Technician
TwoWaves
TwoWaves
Posts: 706
Joined: Thu Apr 24, 2014 8:32 pm

Re: audi s3 with cjxc engine

Post by Technician »

Have you tried the waveform library?

Iver
TwoWaves
TwoWaves
Posts: 182
Joined: Mon May 27, 2019 2:55 pm

Re: audi s3 with cjxc engine

Post by Iver »

Post your waveform, lots of time across the screen from first start up to fault being set.

Freeze frame data from DTC too.

Post Reply