Hi from Russia

Come here to introduce yourself, who you are, what you do, and tell us your
experience with our automotive products.
Post Reply
Kilo_SSK
Newbie
Posts: 5
Joined: Thu Jun 20, 2019 4:21 pm

Hi from Russia

Post by Kilo_SSK » Mon Jun 24, 2019 2:43 pm

Hello everyone!

I'm a potential future Picoscope user from Russia. I work in a garage that is specialised in foreign cars, and I need new kit to take care of the most recent cars that I'm not too familiar with... And I have heard good things about your productions. So, I want first to see what it is exactly, how it works, and if it is the right tool for my needs.

Thanks in advance, I hope I will become one of your customers!

Steve Smith
Pico Staff Member
Pico Staff Member
Posts: 815
Joined: Sun Aug 25, 2013 7:22 am

Re: Hi from Russia

Post by Steve Smith » Tue Jun 25, 2019 1:01 pm

Hello and welcome to the forum.

There is a lot here to digest for sure and if you would like to get started with "how it works" then a good place to start is with our software.

The PicoScope software can be downloaded for free here:https://www.picoauto.com/downloads

Once downloaded you can run our software in Demo mode and use the controls to manipulate the demonstration waveforms (Zoom, rulers, measurements etc.)

Please also try the Automotive Tab within our software to view the Guided Tests for numerous sensors and actuators

You can also download waveforms that have been posted here and run through the diagnosis that accompanies the waveform within the forum post.

Our Scope School Series will be helpful too:
https://www.picoauto.com/library/training

I hope this helps and enjoy the journey, take care.....Steve

Kilo_SSK
Newbie
Posts: 5
Joined: Thu Jun 20, 2019 4:21 pm

Re: Hi from Russia

Post by Kilo_SSK » Thu Jun 27, 2019 6:06 pm

Thanks, this helps a lot, I hadn't found the demo download links by myself :oops: I didn't even think these could be available like that.

Post Reply