Try selecting "CURRENT WAVEFORM ONLY" - Pico Technology

Try selecting "CURRENT WAVEFORM ONLY"

6 posts • Page 1 of 1

Furtmair Auto: OneWave; Posts: 10; Joined: Wed Mar 06, 2019 10:28 pm

Try selecting "CURRENT WAVEFORM ONLY"

Quote

Post by Furtmair Auto » Fri Mar 15, 2019 6:06 pm

Dear Pico friends:

I tried to upload my waveforms, but it says:
'File too large. Try selecting "CURRENT WAVEFORM ONLY"

How do I do this?

Thanks
Uli

liviu2004: TwoWaves; Posts: 474; Joined: Sat Mar 19, 2016 8:23 am; Location: Netherlands

Re: Try selecting "CURRENT WAVEFORM ONLY"

Quote

Post by liviu2004 » Sat Mar 16, 2019 6:20 am

File Save as .... select current waveform.
Same as you Print a document, no big deal.

Furtmair Auto: OneWave; Posts: 10; Joined: Wed Mar 06, 2019 10:28 pm

Re: Try selecting "CURRENT WAVEFORM ONLY"

Quote

Post by Furtmair Auto » Sat Mar 16, 2019 10:26 pm

Thanks liviu2004:

I just did NOT see the OPTION box below.

Uli

liviu2004: TwoWaves; Posts: 474; Joined: Sat Mar 19, 2016 8:23 am; Location: Netherlands

Re: Try selecting "CURRENT WAVEFORM ONLY"

Quote

Post by liviu2004 » Sun Mar 17, 2019 6:09 am

Page 38 of the user guide pdf.

Autonerdz: TwoWaves; Posts: 387; Joined: Wed Nov 20, 2002 4:19 pm; Location: Washington State USA

Re: Try selecting "CURRENT WAVEFORM ONLY"

Quote

Post by Autonerdz » Sun Mar 17, 2019 2:03 pm

Uli,

If you cannot see the options at the bottom of the save window, in windows display options, make sure 100% is selected. You may also try classic windows theme under personalisation.

Furtmair Auto: OneWave; Posts: 10; Joined: Wed Mar 06, 2019 10:28 pm

Re: Try selecting "CURRENT WAVEFORM ONLY"

Quote

Post by Furtmair Auto » Fri Mar 22, 2019 2:44 pm

Hi Autonerdz:

It was always there, I just did not see with my "eyes"!
I am actually using your Version software, which Mike Jones installed for me.

Thanks
Uli

6 posts • Page 1 of 1

Return to “PicoScope 6 Automotive software”