2013 Citroen berlingo 1.6hdi 9hn crank cam sync trace

Ask for and share advice on using the PicoScope kit to fix vehicles here.
Post Reply
Col24980
Newbie
Posts: 1
Joined: Mon Mar 04, 2019 3:22 pm

2013 Citroen berlingo 1.6hdi 9hn crank cam sync trace

Post by Col24980 »

Hi guys, does anyone have a cam/crank sync trace please, I’ve physically checked the valve timing which is spot on but I’m still flagging p0335 fault code and non start situation.
I’m getting a good trace from both cam and crank but don’t have a known good to compare.
If I unbolt the cmp and hold it at an angle imitating retarded valve timing the engine fires up!?

User avatar
vasek
TwoWaves
TwoWaves
Posts: 106
Joined: Tue Feb 17, 2015 7:27 pm

Re: 2013 Citroen berlingo 1.6hdi 9hn crank cam sync trace

Post by vasek »

It should be the same engines:
Attachments
CITROEN HDI 9HX DV6ATED4 START FP.PNG
CITROEN HDI 9HX DV6ATED4 SYNC 2ms.PNG

ben.martins
Pico Staff Member
Pico Staff Member
Posts: 539
Joined: Tue May 16, 2017 1:02 pm

Re: 2013 Citroen berlingo 1.6hdi 9hn crank cam sync trace

Post by ben.martins »

Hello Col,

This engine was used in a number of vehicles as we know. The waveform library has a lot of cam crank references for this 1.6 HDI engine. I would start by looking up 1.6, Diesel and then select Citroen to start with and keep going till you have a pattern where the outputs look similar and compare this way.

Hope this helps and f you need any assistance with this let me know.

Kind regards

Ben

Post Reply