PicoScope 7 Automotive
Available for Windows, Mac, and Linux, the next evolution of our diagnostic scope software is now available.
Im a newbie
-
plaidymotorsltd
- Newbie
- Posts: 1
- Joined: Thu Feb 07, 2019 11:24 am
Im a newbie
Hello to all, I look forward to spending some time getting to know my pico better as I have owned a four channel full kit for well over a year now and have seldom used the kit to help my with diagnosis. I quite often find that the results I get can vary from the suggested waveforms and it makes me nervous to change components based on a slight difference. I hope this forum and waveform library will help me build the confidence I need to use the pico to its full potential
-
ben.martins
- Pico Staff Member
- Posts: 543
- Joined: Tue May 16, 2017 1:02 pm
Re: Im a newbie
Hello and welcome to the forum!
It's great to have you on board and no doubt once you start getting more confident with scope diagnostics you will have the kit out all the time!
If you often worried about the capture then try uploading to the forum and asking the question. We're all in this together and often another pair of eyes might just make it clearer for you.
If you need somewhere to start then take a look at the useful links section for more details. topic15231.html#p57531
Kind regards
Ben
It's great to have you on board and no doubt once you start getting more confident with scope diagnostics you will have the kit out all the time!
If you often worried about the capture then try uploading to the forum and asking the question. We're all in this together and often another pair of eyes might just make it clearer for you.
If you need somewhere to start then take a look at the useful links section for more details. topic15231.html#p57531
Kind regards
Ben
Re: Im a newbie
Hello and welcome to the forum!
Kind Regards
Bobby
Kind Regards
Bobby